H3C CR19000-16, Установка, Быстрый старт

Страница: 10 / 46

2-5
•
Keep the chassis and installation tools away from walk areas.
•
Place the router on a dry and flat location. Make sure anti-slip measures are in place.
•
When servicing the router, do not wear loose clothing or jewelry (such as a necklace) that
could get caught in the chassis.
•
If you cannot install a removable component smoothly, stop your operation and troubleshoot
the issues, preventing component damages caused by misoperations.
•
Clear the work area of any possible electricity hazards, such as ungrounded power extension
cables, missing safety grounds, and wet floors.
ESD prevention
To prevent components from ESD damage, wear an ESD wrist strap before working with the router
and the modules.
To attach an ESD wrist strap:
1. Put the wrist band of the strap on your wrist and fasten the band so that it makes good contact
with your skin.
2. Attach the other end of the strap to an ESD jack on the chassis or rack. Make sure the strap is
reliably grounded.
The router has one ESD jack on both the front and rear panels.
Figure 2-4 Attaching an ESD wrist strap ( to the ESD jack on the rear panel)
Moving the chassis
Physical specifications
Table 2-2 Physical specifications
Model Shipping weight Dimensions (H × W × D)
CR19000-16 119.3 kg (263.01 lb) 931 × 440 × 857 mm (36.65 × 17.32 × 33.74 in)
The shipping weight of the router includes the chassis and packaging material. Determine a moving
method for the chassis based on its shipping weight.