H3C CR19000-16, Установка, Быстрый старт

Страница: 18 / 46

6-1
6
Installing power supplies
Installing DC power supplies
Available DC power supplies
The PSR2400-54D DC power supply is available for the router. Table 6-1 describes the
PSR2400-54D DC power supply specifications.
Table 6-1 PSR2400-54D DC power supply specifications
Item Specification
Rated input voltage –48 to –60 VDC
Input voltage range –40 to –72 VDC
Max input current 80 A
Rated output voltage 54 VDC
Max. output current 44.5 A
Max. output power 2400 W
DC power supply configuration guidelines
Determine the number of DC power supplies based on the system power consumption and the DC
power supply configuration based on the power input mode.
•
As a best practice, configure N+M (M
≥ 1) DC power supply redundancy. Make sure N+M is
not larger than the total number of power supply slots.
N is the number of DC power supplies.
•
Make sure the total output power of the power supplies is greater than the system power
consumption (with a 20% power surplus as a best practice).
•
Provide a circuit breaker or fuse for power input of each DC power supply. Make sure each
input line has a current carrying capacity not less than 100 A.
Installing a DC power supply
1. Thread a flat-blade screwdriver through the small handle on the filler panel and pull the filler
panel out along the guide rails of the slot.