H3C CR16000-M, Руководство по установке

Страница: 10 / 116

1-4
Device safety
•
Attach the device on the ground or other secure places.
•
Do not block the air vents when the device is operating.
•
Use tools rather your hands to fasten screws.
•
Remove all packing materials from the equipment room after the installation is complete.
•
Shut off the power before you can install or move a power supply.
Installation site
Basic requirements
Make sure the installation site meets the following requirements:
•
The installation must be compliant with local laws and regulations.
•
Make sure the installation environment meets the specifications as required by the device, such
as ground load bearing, temperature, humidity, cleanliness, anti-interference, grounding, power
supply, ventilation, and space.
•
To ensure correct operation and long service life of the device, make sure the installation site is
free from flammable and explosive, acid, and alkaline gases, and harmful gases such as SO
2
,
H
2
S, NH
3
, Cl
2
, and NO
2
.
•
To prevent fire caused by high temperature, do not install the device near heat sources, such as
stoves, ovens, microwaves, and electric heaters.
•
To prevent fire caused by high temperature, do not use flammable materials such as paper and
cotton to shield or cover the device when it is operating.
•
Do not use devices with electrical equipment protection rating lower than IP54 outdoors.
Indoor installation
•
To prevent water from entering the device and causing device failure, make sure no water
leakage or condensation can occur on top of the equipment room because of air conditioning
failures.
•
If the device has large openings at the bottom for installation on the ground, you must install the
device on concrete, tile or other non-combustible surfaces.
•
Prevent rodent and pest infestations at the installation site.