GW Instek APS-1102A Скачать руководство пользователя страница 60

Страница: 60 / 285

APS-1102A User Manual

APS-1102A

3-26

3.4.6 Setting output frequency

The AC output frequency can be set in the following range.

Table3-11. Output Frequency Setting

Setting Range

Resolution

Setting Accuracy

1.0 Hz to 550.0 Hz

0.1 Hz



0.01% (1.0 Hz to 550.0 Hz, 23



5°C)

ee “3.4.7 Using limiter functions”

, when using an output frequency setting range limit.

-------

Notes

--------------------------------------------------------------------------------------------------------



If the frequency is set 40 Hz or lower in AC-INT mode, there is a possibility that the output

waveform will be distorted and DC offset will be output.

----------------------------------------------------------------------------------



Operation steps

To set the output frequency, set

in the SET menu.

Press the

key to move the cursor to the

icon.

ENTER

CANCEL

Cursor

Press the

EN TER

key to display the modification box.

ENTER

CANCEL

Modification box

Содержание APS-1102A






























































































































































































































































































Результаты поиска

Содержание APS-1102A

Отзывы:

GW Instek APS-1102A, Руководство пользователя, Страница: 60 / 285

Результаты поиска

Содержание APS-1102A

Отзывы: