Gunnebo RotaSec B120D, Инструкция по установке, эксплуатации и обслуживанию

Страница: 87 / 100

87
.............................
CCEC/ OM Manual RotaSec Titan 1.5 EN 08.2009
Routine Maintenance
General Indications
The mechanism should be inspected and cleaned at regular intervals in order to maintain the
components in good working order and to check for signs of wear.
Note - The following indications refer to an installation where the average number of transits
per year is equal to one million.
When used in dusty conditions, increase the inspection intervals.
Warning - To avoid the risk of electric shock, always ensure that the electrical power and
batteries are disconnected before inspecting the mechanism.
Servicing Access
All serviceable components can be accessed by the removal of all service hatches or from above the
enclosure by removing the roof cover.
Ensure the securing sockets are free to operate and are not damaged
Note - A special key spanner is required to unlock the panels.
Electrical Isolation
No general maintenance is required apart from replacement fuses in the event of a failure.
Lubricants
For the lubrication of parts subject to wear, use Molycote BR2, plus grease or an equivalent grease
containing graphite or molybdenum sulphide (MoS)
Do not grease moving parts unless specifically indicated in this manual. The use of grease can lead to
a build up of dust that can impair operation of the mechanism.