GUIDANCE MARINE 20-0253, Руководство пользователя

Страница: 61 / 81

l
61
Network Communication Settings (Continued)
6. You will be prompted with another window once the settings has been successfuly
applied, click OK to reboot the Sensor.
7. Leaving at least 30 seconds after step 7, click OK on the Reboot Request Succeeded
dialog and the Service Interface should be connected to the Sensor.
Option 2
1. Contact Guidance Marine and obtain a new Sensor network configuration file (connect.
ini).
2. Click on the Take Command button (if the SceneScan Service Interface is not already In
Command).
3. Click on Browse.
4. Locate the connect.ini file within the Select a Sensor network configuration file window
and click on Open.
5. Click on Send To Sensor.
6. You will now be prompted to reboot the Sensor so that the new configuration can be
applied. Click on Yes in the File Sent Successfully window.
7. Modify the SceneScan Service Interface’s and Dashboard’s communications settings if
necessary to match the new Sensor settings (see previous page).
8. Leaving at least 30 seconds after step 6, click on the Connect button.