GUIDANCE MARINE 20-0253, Руководство пользователя

Страница: 39 / 81

l
39
Data Logging
Manual data logging button enabled. Manual data logging not active.
During tracking, the system automatically generates a set of operation logs that can be
analysed by a service engineer to diagnose any system faults. Logging can also be started
manually, when the system is not tracking (see below).
When logging is in progress, the following symbol is displayed in the bottom left-hand corner of
the main pane.
Logs can be exported and e-mailed to Guidance Marine (customerservices.uk@
guidance.eu.com) or your DP supplier in the event of a problem.
Starting and Stopping Manual Logging
To start manual logging:
Firstly ensure that the Dashboard is in command (see
Dashboard – In Command mode
on page 32) then either:
1. Navigate to Advanced > Data Logger.
2. Click on the Start button.
Or
Press Alt+L.
Or
1. Click on the Hotkeys tab.
2. Click on the Start Manual Data Log button.
To stop manual logging:
Either
1. Navigate to Advanced > Data Logger.
2. Click on the Stop button.
Or
Press Alt+L.
Or
1. Click on the Hotkeys tab.
2. Click on the Stop Manual Data Log button.
Or
Click on the flashing Data Logging Indicator in the top left of the main screen.
Or
Manual logging automatically stops when a Dashboard suspends the sensor or relinquishes
command, or when another Dashboard takes command.
DataLogging with Multiple Dashboards
On a SceneScan system with multiple Dashboards, data logs are written by whichever
Dashboard is in command. If another Dashboard then takes command, data logging ceases
on the Dashboard that is no longer in command and starts automatically on the Dashboard
that takes command.
Exporting Data Logs
The most recent data logs can be exported to a remote drive on the Dashboard computer.
To Export Data Logs:
1. Insert a USB or other removable drive into the Dashboard computer.
2. Select the period for which you wish to export logs
(Last Hour, Last 4 Hours, etc).
3. Select Destination Drive from drop-down list, if not already displayed.
4. Click on Export Data Logs.
Use the Refresh button to update the list of USB drives and the Available Space value.
N.B. In addition to data logs, screenshots from the selected time period and a list of alarms
are also exported.