Gude Expert Power Control 8221 Series, Руководство пользователя

Страница: 83 / 97

83
Expert Power Control 8221/8226 © 2021 GUDE Systems GmbH
Specifications
SWITCH2=1} {OFF=0|ON=1} show
timer {rule_num} action delay set {0..65535}
delay between cmds
timer {rule_num} action delay show shows delay between cmds
timer {rule_num} action console set "{cmd}" sets cmd string
timer {rule_num} action console show shows cmd string
timer {rule_num} action hash set "{data}" sets action binary form
timer {rule_num} action hash show shows action binary form
timer {rule_num} delete delete one timer
timer delete all delete all timer
vt100 enters cmd group "vt100"
vt100 echo set {OFF=0|ON=1} sets console echo state
vt100 echo show shows console echo state
vt100 numeric set {OFF=0|ON=1} sets numeric mode
vt100 numeric show shows numeric mode state
vt100 reset resets terminal
Notes
1. Legacy - The command has been replaced by a newer version
2. Command can be entered on any level
3. The output may show 2 lines - the 1st line shows the actual state, the 2nd line the
status after reboot
4. The output may show several lines
5. Please see the
Energy Sensor Table for the right energy index
6. Please see the External Type and External Sensor Field Tables for the correct
sensor index
Energy Sensor Table "{energy_sensor}"
Index Description Unit
0 Forward Active Energy Wh
1 Power Active W
2 Voltage V
3 Current A
4 Frequency 0.01 hz
5 Power Factor 0.001
6 Power Angle 0.1 degree
7 Power Apparent VA
8 Power Reactive VAR
9 Forward Active Energy Resettable Wh
10 Forward Reactive Energy VARh
11 Forward Reactive Energy Resettable VARh
12 Reset Time - sec. since last Energy Counter Reset s
13 Reverse Active Energy Wh
14 Reverse Reactive Energy VARh
15 Reverse Active Energy Resettable Wh
16 Reverse Reactive Energy Resettable VARh
17 Absolute Active Energy Wh
18 Absolute Reactive Energy VARh
19 Absolute Active Energy Resettable Wh
20 Absolute Reactive Energy Resettable VARh
21 Residual Current A
Dependent on the device model Residual Current may not be supported.
External Sensor Type Table "{sen_type}"
Constants "{7x01=0|7x04=0|7x02=1|7x05=1|7x06=2}"