Gude Expert Power Control 8021 Series, Руководство пользователя

Страница: 7 / 98

7
Expert Power Control 8021/8025 © 2021 GUDE Systems GmbH
Device Description
·
Switching of 4 load outputs.
·
Energy measurement of the mains connection and measurement of voltage, current,
active power, reactive power, apparent power, frequency, phase angle and power
factor.
· 2 energy counters, one counter counts continuously, the other counter can be reset
· Residual current measurement type A
·
Connection for 2 optional sensors for environmental monitoring (temperature, humid-
ity and air pressure)
· A four-digit 7-segment LED display (for current display or data of external sensors).
·
Second four-digit 7-segment LED display (for Revision 2 model)
·
Energy measurement and energy counter for each of the 4 load outputs and meas-
urement of voltage, current, active power, reactive power, apparent power, fre-
quency, phase angle, power factor per output (see Feature Matrix).
· Separate overvoltage protection of the mains connection.
· Console commands via SSH, Telnet and serial interface
· SSH support with public key and passwords
·
Individually parameterisable switch-on delay of all outputs
·
Programmable timetables and turn-on/turn-off sequences
·
Individually adjustable watchdog for each output, which switches depending on ac-
cessibility (network ping)
·
Dual TCP/IP stack with IPv4 and IPv6 support (IPv6-ready)
·
Control and monitoring of the device via Ethernet with an integrated web server with
SSL encryption (TLS 1.1, 1.2, 1.3)
·
Control and configuration with CGI parameters and JSON messages via HTTP
(REST API)
· SNMP (v1, v2c and v3, traps)
·
Modbus TCP support
·
Radius support
·
Generation of messages (e-mail, syslog and SNMP traps) and switching of relays
depending on sensor measurement limits
·
Firmware update during operation via Ethernet possible
·
Encrypted e-mails (SSL, STARTTLS)
·
Access protection through IP access control
· Low own consumption
· Developed and produced in Germany
Feature Matrix
Product Ports Single Port Measurement GSM Connector
8021-1
4
IEC
8021-2
4
IEC-Lock
8021-3
4
CEE 7-3
8025-1
4
x IEC
8025-2
4
x IEC-Lock
8025-3
4
x CEE 7-3
1.4 Installation
The Expert Power Control 8021/8025 comes in two variants. Once with the original
display (revision 1).