GTO 3000XLS Скачать руководство пользователя

Страница: 1 / 44

WARNING!

This equipment is similar to other gate or door equipment and meets or exceeds

Underwriters Laboratory Standard 325 (UL 325). However, gate equipment has

hazards associated with its use and therefore by installing this product the installer

and user accept full responsibility for following and noting the installation and

safety instructions. Failure to follow installation and safety instructions can result

in hazards developing due to improper assembly. You agree to properly install this

product and that if you fail to do so GTO Access Systems, (“GTO”) shall in no event

be liable for direct, indirect, incidental, special or consequential damages or loss of

profits whether based in contract tort or any other legal theory during the course

of the warranty or at any time thereafter. The installer and/or user agree to assume

responsibility for all liability and use of this product releasing GTO Access Systems,

from any and all liability. If you are not in agreement with this disclaimer or do not

feel capable of properly following all installation and safety instructions you may

return this product for full replacement value.
READ ALL INSTRUCTIONS CAREFULLY AND COMPLETELY before attempting to

install and use this automatic gate operator. This gate operator produces a high level

of force. Stay clear of the unit while it is operating and exercise caution at all times.
All automatic gate operators are intended for use on

vehicular gates only.

This product meets and exceeds the requirements of UL 325, the standard which

regulates gate operator safety, by Underwriters Laboratories Inc.

For more information on the GTO ACCESS SYSTEMS full line of automatic gate

operators and access controls visit our website at www.linearproaccess.com.

Printed in China for GTO Access Systems, LLC.

R4818 06-03-16

DUAL Gate Operator System

Installation Manual

3000XLS

PROFESSIONAL RESIDENTIAL

ACCESS

SYSTEMS

3200XLS

PROFESSIONAL RESIDENTIAL

ACCESS

SYSTEMS

In a DUAL gate system the LPA 3000XLS is the MASTER gate

operator and the LPA 3200XLS is the SECOND gate operator.

PROFESSIONAL INSTALLATION RECOMMENDED!

NCB

Содержание 3000XLS













































Результаты поиска

Содержание 3000XLS

Отзывы:

Похожие инструкции для 3000XLS

Бренды по названию

Популярные бренды

GTO 3000XLS, Руководство по установке

Результаты поиска

Содержание 3000XLS

Отзывы:

Похожие инструкции для 3000XLS

Бренды по названию

Популярные бренды