
Chapter 5: Test Type Displays
The following section details test type displays for the standard configuration of
the GSI Pello. Specific displays and menu selections for Special Test, Speech
Plus and High Frequency options are located in Chapter 9.
Monitor
The GSI Pello comes standard with an LCD display. The LCD is hinged to the
Pello and is used to display all of the testing information from the instrument.
When the LCD is in the lowered position, easy access to the rear connector panel
is provided.
Test Type Screens
The information displayed on the Pello LCD varies depending on the Test Type.
There are common elements found on all screens such as the Channel 1 and 2
settings, the Navigation menu and the Title Bar.
Title Bar
The title bar is located at the top of the display. The title bar displays the test type
in the middle. The patient name will appear on the left side of the title bar if a
patient name has been entered (or selected from an imported patient list). The
right side of the title bar displays “Examiners…” if examiners have been entered.
The examiner list may be entered from the Config App.
Test Type Information
Under the title bar, test specific information will be displayed. On the left and
right side, the current output in dB HL for Channel 1 and Channel 2 will be
displayed. The other information displayed will depend on the test type and is
described as part of the individual test type displays.
Navigation Menu
This menu is located at the bottom of the display. It utilizes the on-board
navigation buttons or an external mouse to access the menu options. The menu is
specific to the test type selected.
Time and Date
The date and time are displayed in the bottom right corner of the screen. Using
the Config App, the time may be configured in a 12 or 24 hour format and the
Date may be configured in any order (dd/mm/yyyy, etc.). It is also possible to set
the format on the configuration screen of the instrument. It is necessary to use an
external keyboard to change the date and time from the configure screen of the
instrument.
NOTE:
The time does not change automatically for daylight savings time. The
operator must manually change the time using the configure button on the front
panel of the instrument or the Config App.