GSi Cumberland PNEG-1333, Инструкция по установке и эксплуатации

Страница: 41 / 68

4. Assembly
PNEG-1333 Turkey Poult Feeder System 41
Winching (Continued)
9. Attach the 1-3/4" (4.445 cm) pulley to each hook as shown in Figure 4BB .
Figure 4BB
10. Thread the 1/8" (0.3175 cm) drop cable through each pulley and attach it to the 3/16" (0.47625 cm)
winch cable about 6" (15 cm) from the pulley towards the winch with the 1/8" x 3/16" (0.3175 cm x
0.47625 cm) cable clamps.
(See Figure 4BB.)
11. Place the hangers to the feed line directly below each pulley by snapping the wire hanger around the
rib of the tube. (See Figure 4BC on Page 42.)
Be sure the hangers are not touching the shocker wire.
Spread the wire hanger just enough to force it over the auger tube. The clip should be located within
6" (15 cm) above the hanger, as shown in
Figure 4BC on Page 42 . So the feeder line can be raised without
interference when the house is cleaned.
12. Cut the drop cable long enough for installation from the winch cable, through the hanger to the cable
adjustment clip. (See Figure 4BC on Page 42.)
Ref # Description
A Cable Clamp
B Winch