GSi Cumberland PNEG-1333, Инструкция по установке и эксплуатации

Страница: 40 / 68

4. Assembly
40 PNEG-1333 Turkey Poult Feeder System
Winching (Continued)
5. Attach a board, capable of supporting the weight of the feeding system, to the ceiling a few feet from
the center of the feeder line.
6. Securely attach the winch to the board. The brake mechanism will protrude on one side.
7. For systems shorter than 360' (109.7 m), extend the 3/16" (0.476 cm) winch cable the full length of
the feeder line, stringing the cable through the cable hole on the winch drum. Temporarily attach the
cable to the ceiling with nails, staples or some type of fastener. The winch cable does not pass
though any pulleys.
(See Figure 4BA.)
8. For systems longer than 360' (109.7 m), install the cable with double reduction pulleys as shown
in Figure 4BA .
Figure 4BA
NOTE: The distance between the winch drum and the double reduction pulleys should be slightly greater
than the distance the feed line is to be raised.