GSi Cumberland PNEG-1333, Инструкция по установке и эксплуатации

Страница: 37 / 68

4. Assembly
PNEG-1333 Turkey Poult Feeder System 37
Winching (Continued)
2. Required winch drop line locations. (See Figure 4AY on Page 39.)
a. One to hang each drive unit.
b. One within 3' (0.9 m) of the drive.
c. Two (2) to hang each feed hopper (19" (48.26 cm) apart for 120# and 200# hoppers,
25" (63.50 cm) for 300# and 400# hoppers).
d. For 120# and 200# hoppers, bolt two (2) halves of the hopper suspension brackets together using
two (2) 5/16"-18 bolts and nuts. (See Figure 4AV.)
For 300# and 400# hoppers, bolt two (2) halves of the hopper suspension brackets together with
four (4) support brackets using twelve (12) 5/16"-18 bolts and nuts.
(See Figure 4AW.)
The drop cables will need to be spaced 19" apart for 120# and 200# hoppers or 25" for 300# and
400# hoppers. Suspend the boot using the two (2) drops on each side of the hopper as shown
in
Figure 4AX on Page 38 . Bolt the cable guides to two (2) sides of the hopper using four (4)
5/16"-18 bolts and nuts. Run the cable though the cable guides interlocking them in the cable
guide slots.
Figure 4AV
Figure 4AW
Ref # Description Ref # Description
A Hopper Suspension Bracket C 5/16"-18 Bolt
B Hopper Suspension Support Bracket D 5/16"-18 Nut