Grundig POWERMAX Q2, Руководство по обслуживанию

Страница: 6 / 120

6
SAFETY
-------------------------------------------------------------------------------------------------------------------------
WARNING
Injuries caused by falling TV set
Never set up the TV on unstable places. Other-
wise the TV can tip over and cause injuries and
fatalities. Observe the following precautions
especially to protect children from such negative
incidents:
7
Make sure that the stand or other furniture you
will place the television on is robust enough to
carry the television.
7
Make sure that the TV set does not protrude
beyond the dimensions of the furniture on
which it is resting.
7
Do not place the television on furniture such as
cupboard, sideboard, bookshelf that tends to
tip over. In obligatory cases, such bearers must
be fixed onto the wall or suchlike structures so
that the television does not tip over.
7
There must be no cover, lace, cloth, tulle or
similar items between the television and the
stand/furniture you have placed the television
on.
7
Observe the aforementioned warnings when
you displace the television.
WARNING
Panels used in LED panel televisions are quite
sensitive in electrical and physical aspects.
Therefore the following warnings should be
observed.
7
Panel surface is quite sensitive and can be
damaged easily. Take care to avoid scratches
on the panel surface. When you need to lay
down the panel, place it on a floor that will
not cause damages. Besides, do not use rough
materials when touching or wiping the panel.
7
Keep the panel surface clean. Put on rubber
gloves when touching the panel surface. To
clean the surface, use a mild cleaning agent
that does not get electrified.
7
Keep the LED module away from water. Spill-
ing water on or in the panel causes electrical
damage on the panel. It should be wiped dry,
if needed.
7
Avoid sudden temperature and humidity
changes. Sudden changes of temperature and
humidity may harm the panel.
7
High temperature and humidity shortens the
lifecycle of the panel. LED panels are not suit-
able for use under high temperature and hu-
midity conditions. The user should observe the
specified temperature and humidity values.
7
Keep it away from harmful (corrosive) gases.
Corrosive gases damage chemical and elec-
tronic structure of the LED panel.
7
Static electricity flow may damage the panel.
LED module contains materials sensitive to
static electricity such as CMOS, etc. The body
should be grounded before touching the
panel. Also, you should not touch connector
areas with bare hands.
7
The same image should not stay on the screen
for prolonged times. Keeping the same image
on the screen for a long time may lead image
retention and the panel may get damaged.
Therefore the TV should be turned off when
not in use and the image should be changed
at certain intervals when displaying still im-
ages.