Grundig POWERMAX Q2, Руководство по обслуживанию

Страница: 40 / 120

40
USB OPERATION
--------------------------------------------------------------------------------------------
Connecting external data me-
dium
It is advised to switch the television to stand-by
mode before connecting the External Data me-
dium. Connect the device and then switch the
television on again.
Before disconnecting the data medium, first of
all, the television must be switched to standby,
otherwise files may get damaged.
Notes:
7
»
USB3
« port of the TV supports 500 mA
current according to USB standard. Devices
that consume more power such as external
hard disks can only be connected to the
»
USB1
« and »
USB2
« interface of the
television.
7
To get higher efficiency from your external
devices supporting USB 3.0, it is recom-
mended to connect them to »
USB1
«
interface of the TV.
7
If you are using a power cable for the
external hard disk that you have connected
to the » USB1 « and » USB2 « USB interface,
then the power cable of the external hard
disk must also be unplugged when the TV is
turned off.
7
You must not disconnect the USB Device
from the TV while a file on the USB Device
is being read by the TV.
A bi-directional data transfer as defined for
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
7
USB transfer is not an operating mode by
itself. It is only an additional function.
1
Connect the »
USB1
« and »
USB2
« USB
interface of the television and the corre-
sponding data output socket on the external
data device (external hard drive, digital
camera, card reader or MP3 player) using
a USB cable;
or
plug the memory stick into the » USB3 «
interface of the television.
Removing the external data medium
Disconnect the data medium be-
fore removing the external data
medium.
1
Open the menu with »
MENU
«.
2 Select »Media Center« with »
V
«, »
Λ
«,
»
<
« or »
>
« and confirm with » OK «.
3 Select »Safely Remove Disk« with »

« (red).
4
Remove the data medium from the socket.