Grundig POWERMAX Q2, Руководство по обслуживанию

Страница: 72 / 120

72
NETWORK SETUP
-------------------------------------------------------------------------------------------
Connecting the TV to a "hidden"
network
Even if the SSID (Service Set Identifier) of the
router is not visible, you can connect your TV to
this network.
1 Open the menu with » MENU «.
2 Use »
V
«, »
Λ
«, »
<
« or »
>
« to select »Set-
tings« and confirm with » OK «.
3
Select »Network« with »
>
« or »
<
« and
press »
V
« to confirm.
– »Network configuration« menu will be
displayed.
4 Select »Select Access Point« with »
V
« or
»
Λ
« and press » OK « to confirm.
– »Select Access Point« menu will be dis-
played and available wireless networks
will be scanned and displayed in the
menu.
5
Press »

« (red).
– »Add Network« menu will be displayed.
6 Select »Access Point Name« with »
V
« or
»Λ«
and press » OK « to confirm.
– A menu for entering the SSID will be
displayed.
Note:
7
For the TV to discover the wireless modem
on the network, the network name should
support ASCII characters.
7
Select the required character with »
V
«,
»
Λ
«, »
<
« or »
>
« and move to the next
character with »
OK
«.
– Using »
Shift
«
➡
»
OK
«, you can switch
between uppercase letters/numbers and
lowercase letters/special characters.
– Select »
Del
« to delete the character
entered and press »
OK
« to confirm.
8 Confirm SSID by pressing »

« (green).
9 Select »Security Type« with »
V
« and select
the required option as »WPA2« with »
<
«
or »
>
«.
10 Confirm the setting with »
▯
« (red).
– The network is now in the »Select Access
Point« menu.
11 Select the network with »
V
« or »
Λ
« and
press » OK « to confirm.
– Wireless connection password screen will
be displayed.
12
Select the required character with »
V
«,
»
Λ
«, »
<
« or »
>
« and move to the next
character with »
OK
«.
– Using »
Shift
«
➡
»
OK
«, you can switch
between uppercase letters/numbers and
lowercase letters/special characters.
– Select »
Del
« to delete the character
entered and press »
OK
« to confirm.
13 Confirm the password by pressing »

«
(green).
– »Connecting ... Please wait« message will
be displayed.
14 Press »

« (green) to make sure that the
network connection has been established
with the settings made.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages and MAC address will be
displayed.
15
Press »
EXIT
« to finish the setting.