Grundig POWERMAX Q2, Руководство по обслуживанию

Страница: 36 / 120

36
USB OPERATION
--------------------------------------------------------------------------------------------
Program setting for recording
... with electronic program guide
Electronic program guide data can be used for
recording.
A total of 25 EPG reminders and/or recorders
can be set in total.
1 Press » GUIDE « to open the electronic
program guide (EPG).
2
Select the desired channel with »
V
« or
»
Λ
«.
– Information about the actual TV program
will be displayed.
3 Press »
<
« or »
>
« to select the TV program
you want to record.
4 Press » OK « to add broadcasts to the timer.
– Information for the TV program to be
recorded will be displayed.
5
Select »Record« with »
>
« and press »
OK
«
to confirm.
– Recording data range will be displayed.
6 Press » OK « to confirm.
7
Press »
EXIT
« to end the settings.
Notes:
7
Open the menu with » MENU « if the
recording data will be modified. Select the
»Schedule List« menu with »
V
«, »
Λ
«, »
<
«
or »
>
« and confirm with » OK «. Press »

«
(green), modify the data and save it with
»

« (blue).
7
A warning will be displayed before the
timer recording starts and it will count down
for 10 seconds to allow you to switch to
the channel. At the end of 10 seconds,
the channel to be recorded will appear
automatically.
7
If the timer recording starts during play-
back, playback will stop. If you do not select
»Yes« in the warning prompt, recording
will start automatically at the end of the
countdown.
7
Note specific to UPC customers: While the
program is being recorded, part of the previ-
ous or the next program may be included in
the recording because of Programme Guide
errors. In such cases, keep in mind that the
highest family protection level will apply to
the whole recording if one or more of those
programs has/have family protection.
Setting the delay/follow-up time
You can change the recording time set with the
electronic TV guide with this function.
If you think that a program will start a few min-
utes earlier or will end several minutes later, you
can "add" up to 60 minutes to this time.
1 Open the menu with » MENU «.
2
Select »Schedule List« with »
V
«, »
Λ
«, »
<
«
or »
>
« and confirm with »
OK
«.
3 Confirm »Padding Time« with »

« (blue).
4
Change the start time with »
<
« or »
>
«.
5 Use »
V
« to switch to the »End« line and
change the end time with »
<
« or »
>
«.
6 Use »
V
« to press »Save« to save the set-
ting.
7
Press »
EXIT
« to end the settings.