Grundig POWERMAX Q2, Руководство по обслуживанию

Страница: 80 / 120

80
Searching for television chan-
nels from the cable provider au-
tomatically
1
Open the menu with »
MENU
«.
2 Use »
V
«, »
Λ
«, »
<
« or »
>
« to select »Set-
tings« and confirm with » OK «.
3
Select »Source« with »
>
« or »
<
« and press
»
V
« to confirm.
4 Select »Automatic Channel Search« with
»
V
« or »
Λ
« and press » OK « to confirm.
5 Select »Cable« with »
V
« or »
Λ
« and
confirm with » OK «.
– »Automatic Channel Search« menu will
be displayed.
Scan Type Quick
Frequency Auto
Network ID Auto
Picture
Thu
XX XXX XXXX
Timer Network TV Parental
Settings > Source > Automatic Channel Search
Continue Change Mode Back
BACK
6
Select »Scan Type« with »
Λ
« or »
V
« and
select »Quick« or »Full« scan type with »
<
«
or »
>
«.
– »Quick« scanning function tunes the
channels according to the cable operator
information in the broadcasting signal.
»Network ID« performs the installation
that is suitable to your network. Network
ID must definitely be entered if known. If
you do not know the Network ID, please
select »Auto« for »Frequency« and »Net-
work ID«.
– If scanning cannot be performed with the
»Quick« option, select »Full«. All current
channels will be tuned and stored in »Full«
scanning. This scanning process may take
a long time. This option is recommended if
your cable carrier does not support quick
scanning function.
Note:
7
You can speed up the search. To do this,
frequency and network ID information are
required. You may get this data from your
cable operator or find it in Internet forums.
7
Select »Continue« with »

« (blue).
Note:
7
Select whether to search for digital or
analog TV channels. To do this, press »
V
«
or »
Λ
« to select »Digital« or »Analog« and
unmark or mark the "little tick" with » OK «.
8 Press »

« (Red) to start searching.
Notes:
7
When updating via the same satellites a
security query is displayed at the beginning
of the search.
7
To store them in the previously stored chan-
nels list, select »Yes« with »
<
« or »
>
«;
or
select »No« to delete the channels and
press »
OK
« to confirm.
– The »Digital Search« menu will appear
and the search for TV channels will begin.
– The search is complete as soon as
»Search is completed!« appears.
Note:
7
The search can be terminated with » EXIT «.
9 Press »

« (yellow) to switch to Channel
Editor;
or
Press » EXIT « to end the setting.
DETAILED CHANNEL SETTINGS
----------------------------------------------------