ENGLISH
33
When I press keys on the handset, nothing happens.
Make sure the batteries are fitted in your handset. If the batteries
•
level symbol on the display shows “low”, recharge the batteries.
Check whether there’s a key symbol on the display. If so, the
•
keypad is locked. Turn to the user manual to find out how to
unlock it.
When I press keys on the handset, digits appear on the
display, but I can’t make an outside call.
Try moving the handset closer to the base unit.
•
Try a different position for the base unit-perhaps higher, or further
•
from other electrical equipment.
The phone does not ring
Check that the base unit’s mains power adapter is plugged in
•
and power is switched on. The base unit needs mains power for
normal operation of the phone-not just charging the batteries.
Make sure you are using the telephone line cable that was
•
supplied with your Dect phone. Other telephone line cables might
not work.
Check that you have set the ringer volume to off. See the user
•
manual for more information.
Check that the total REN value of all equipment connected to
•
your telephone line is no more than 3. Disconnect one or more
telephones and see whether that helps.
The base does not ring.
Check that the base power is ON, and the base ringer is set ON.
•
Check that the line cord is correctly fitted and undamaged.
•
The CHARGE light on the base unit does not come on.
Check the handset is properly stationed.
•
Check the connections between the base unit and mains power
•
socket.
Clean the batteries charging contacts with a dry cloth.
•
When I press the CALL button, I hear a loud noise.
The strange noise is caused by interference. Disconnect the mains
•
power lead from the back of the base unit, and then wait for 30
seconds before reconnecting it.
There is ‘beep’ sound while I am on a call.
You may be going out of range of the base unit. Move closer, or
•
TROUBLESHOOTING
