ENGLISH
27
BASE SETTINGS
To Set Base Ringer
You are allowed to set the melody, volume of your Dect phone base
here.
To set Ringer Volume (1-9 melody)
Press Scrolling button and Left key to select Settings under main
1.
menu mode;
Press Scrolling button and Left key to select Cordless settings;
2.
Press Scrolling button and Left key to select Base settings;
3.
Press Left key to select Ringer Settings;
4.
Press Left key again to select Ringer Volume;
5.
Press Scrolling button up/down to change the volume level, then
6.
press Left key to confirm your setting.
If you wish to set the Ringer Melody, this is easily done here.
Dial Settings
You are allowed to set flash time, auto pause and dial mode here.
To Set Flash Time
Repeat 1-3 steps above;
1.
Press Scrolling button and Left key to select Dial Settings;
2.
Press Left key to select Flash Time;
3.
Press Scrolling button and Left key or just Left key to select your
4.
preferred flash time (Short, Long).
To Set Auto Pause
When you call a number with a pause, the phone waits a few seconds
before transmitting the next digits in the dialing sequence. This is useful
when you have to dial a number for access to an outside line, or for
going into a voicemail system. You are allowed to set one number in
Auto Pause.
Press Scrolling button and Left key to select Auto Pause under Dial
1.
Setting mode;
Use the keypad to input the PIN (0000), press Left key to confirm;
2.
Use the keypad to input the number (for example “123”) you
3.
want to set auto pause, press Left key to confirm. When you dial
number “123456”, the pause will happen between “123” and
“456”.
To Set Dial Mode
Press Scrolling button and Left key to select Dial Mode under Dial
1.
Setting mode;
Press Scrolling button and Left key or just press Left key to select
2.
your preferred mode (Pulse, Tone).
