26
Press Scrolling button and Left key to select Select Base under
1.
Cordless settings mode, the display shows BASE 1; BASE 2; BASE
3; BASE 4;
Press Scrolling button and Left key to select the certain base.
2.
To De-register a Handset
You may need to do this if you have more than one handset registered to
your base unit and you need to replace a faulty handset.
Press Scrolling button and Left key to select De-register under
1.
Cordless settings mode;
Key in the PIN (default 0000), press Left key to confirm;
2.
Then key in the number of the handset you want to de-register, press
3.
Left key to confirm.
Note:
You cannot de-register the handset you are currently using.
To Set the Contrast
You can adjust the contrast of your display.
Press Scrolling button and Left key to select Settings under main
1.
menu mode;
Press Scrolling button and Left key to select Phone settings;
2.
Press Left key to select Contrast;
3.
Press Scrolling button up/down and Left key to change the
4.
contrast.
Auto-talk Function
Normally, you need to press the Call button to answer an incoming call.
But with AUTOTALK function turned on, when your handset is ringing for
an incoming call, you can answer the call by simply lifting the handset
from the base unit without pressing the Call button.
Press Scrolling button and Left key to select Settings under main
1.
menu mode;
Press Scrolling button and Left key to select Phone settings;
2.
Press Scrolling button and Left key to select Auto-talk;
3.
Press Scrolling button and Left key to select Off / On.
4.
Note:
If you have turned Auto-talk on, do not press the Call button after you’ve
answered a call by lifting the handset, otherwise, you’ll disconnect the
call.
PHONE SETTINGS
