ENGLISH
29
If you have set a PIN and forgotten it, you need to reset the system. The
PIN will be reset to 0000. If you reset the system, you will lose all stored
information (including numbers in memory) and all features will return
to their default settings. You need to register the handset to the base unit
again.
While you are resetting the system, you should disconnect the telephone
line cord from the back of the base unit, so you won’t be interrupted by
incoming calls. To reset the system without the PIN:
Disconnect the power lead from the back of the base unit
1.
Press and hold the HANDSET LOCATOR button in the base unit,
2.
at the same time connect the power lead into the back of base
unit. Release the LOCATOR button after you hear “beep” sound
for five times. The IN USE light on base unit lights during this
whole process.
After 2~3 seconds, you can hear “beep” sound for two times
3.
again and the IN USE light goes off;
Disconnect the power lead from base. Reconnect and you will
4.
hear a confirmation tone from the base unit.
RESETTING THE SYSTEM
CONTACTS
Your list of contacts contains all Skype users as well as all landline phone
users that you have added. There is a limit to the number of entries
you can make, but your contact list can nevertheless hold hundreds of
contacts.
To access landline contacts, you have to sign in to Skype.
To Access your Contacts List
Press Right key to access your contacts list in standby mode or
In standby mode, press Left key to enter the main menu;
1.
Press Scrolling key and Left key to select Contacts;
2.
Browse your contacts using Scrolling key, press Left key to select
3.
one;
Press Scrolling key and Left key to select your desired action (Call,
4.
Send voicemail, View profile, Advanced)
Under Advanced you can access more options (Rename, Remove,
5.
Block, Request details, Add a contact).
To Exchange Contact Details Request
You can send an authorization request to a Skype user –and if it is ac
-
cepted, you can see his or her online status.
When adding a contact to your Contact list you will be prompted to
specify if you want to send an authorization request. We recommend
