Grundig GD-RT-5008P, Руководство пользователя

Страница: 71 / 216

71
Steps
Step 1
Go to Menu>Record>Parameters .
Record Parameters
Step 2
Set the parameters for recording.
1) Select the Record tab to configure.
2) Select a camera from the camera drop-down list.
3) View the Camera Resolution .
Note:
When HD-TVI, AHD, or HDCVI input is connected, you can view the information including
the input signal type, resolution and frame rate (e.g., 5 MP 20 Hz). When CVBS input is
connected, you can view the information such as NTSC or PAL.
4) Configure the following parameters for the Main Stream (Continuous) and the Main
Stream (Event) .
Stream Type : Set the stream type to be Video or Video & Audio.
Resolution : Set recording resolution.
Note:
 GD-RT-AP5004P, GD-RT-AP5008P, GD-RT-AP5016N, GD-RT-AT5016N support 5
MP and 4 MP resolution of all the channels.
 The 3 MP signal input is available for channel 1 of GD-RT-AC3004N, and for channel
1/2/3/4 of GD-RT-AC3016N.
 The analog signal inputs (HD-TVI, AHD, HDCVI, CVBS) and IP signal input can be
recognized and connected automatically.
 If the configured encoding resolution conflicts with the resolution of the front-end
camera, the encoding parameters will adjust automatically to meet the front-end