Grundig GD-RT-5008P, Руководство пользователя

Страница: 172 / 216

172
Step 5
You can enter the Array Settings interface to view the rebuilding status.
Step 6
After rebuilding successfully, the array and virtual disk will restore to Functional.
13.3 Deleting Array
Note:
Deleting array will cause to delete all the data saved in the disk.
Step 1
Enter the Array Settings interface.
Menu>HDD>RAID>Array
Step 2
Select an array and click to delete the array.
Step 3
In the pop-up message box, click Yes button to confirm the array deletion.
Note:
Deleting array will cause to delete all the data in the array.
13.4 Checking and Editing the Firmware
You can view the information of the firmware and set the background task speed on the
Firmware interface.
Step 1
Enter the Firmware interface to check the information of the firmware, including the
version, maximum physical disk quantity, maximum array quantity, auto-rebuild
status, etc.
Step 2
You can set the Background Task Speed in the drop-down list.
Step 3
Click Apply to save the settings.
14. HDD Management
14.1 Initializing HDDs
A newly installed hard disk drive (HDD) must be initialized before it can be used with your
DVR.
Step 1
Go to Menu > HDD > General .