Grundfos Selcoperm SES Series, Инструкция по установке и эксплуатации

Страница: 50 / 82

English (GB)
50
8.5.10
Settings cell line
In this menu, the settings of the selected cell line can be viewed
and changed.
Fig. 46
Settings cell line
To change a value, touch the respective field and enter the new
value via the numeric keyboard. See section
8.5.2 Keyboard .
To save the settings, push [ ].
To reset the values to factory settings, push [ ].
To revert to the previous menu, push [ ].
For details on general menu symbols see section 8.5.6
System
overview
.
8.5.11
Settings system
In this menu, the settings of the system can be viewed and
changed.
Fig. 47
Settings system
To change a value, touch the respective field and enter the new
value via the numeric keyboard. See section
8.5.2 Keyboard .
To save the settings, push [ ].
To reset the values to factory settings, push [ ].
To revert to the previous menu, push [ ].
For details on general menu symbols see section 8.5.6
System
overview
.
Menu action Required user level
Access menu 2
Parametrising staff
Change settings 2
Parametrising staff
Reset to factory settings 3
Commissioning staff
ID
00
15
Display text Description
Temperature
cell
connection
Temperature of the DC connections on the cells
of the selected cell line.
Water flow
rate
Water flow rate through the selected cell line
measured by sensor (1.10), (2.10) or (3.10). See
section
4.1.6 Piping and Instrumentation
Diagram (PID) .
Water
temperature
Water temperature measured by sensor (1.11).
See section
4.1.6 Piping and Instrumentation
Diagram (PID) .
min.
Minimum value
max.
Maximum value
t
Time delay before an alarm is triggered after a
value range was undercut or exceeded. Time
delay in seconds.
Menu action Required user level
Access menu 2
Parametrising staff
Change settings 2
Parametrising staff
Reset to factory settings 3
Commissioning staff
ID
00
16
Display text Description
NaClO
temperature
Temperature of the NaClO solution measured by
sensor (0.03). See section
4.1.6 Piping and
Instrumentation Diagram (PID) .
Water flow
rate
Water flow rate through the system measured by
sensor (0.02). See section
4.1.6 Piping and
Instrumentation Diagram (PID) .
min.
Minimum value
max.
Maximum value
t
Time delay before an alarm is triggered after a
value range was undercut or exceeded. Time
delay in seconds.