Grundfos Selcoperm SES Series, Инструкция по установке и эксплуатации

Страница: 48 / 82

English (GB)
48
8.5.6
System overview
The menu "
System overview
" is shown after startup and during
normal operation of the system. It shows system information and
the status of the system.
Display areas:
Fig. 42 Menu "
System overview
" - electrolysis process
stopped
Menu action Required user level
Access menu No login required
1 Headline
2 Content area
3 Menu bar
ID 0
000
Symbol
Area
Description
See
section
1
Indicates that the PLC is running.
8.5.22
Indicates that the PLC is disconnected
from the touchscreen.
Indicates that the PLC is stopped.
1
Indicates that the system is in
operating state "Stop".
8.3.2
Indicates that the system is in
operating state "Production".
Indicates that the system is in
operating state "Standby".
1
Indicates that the system is in
operation mode "Service". 8.4
8.5.22
Indicates that emergency stop is
activated.
8.2.1
Indicates that an alarm is present at the
external alarm input.
4.2.6
2
Push this symbol to open the
submenus of the rectifier.
8.5.12
2
Temperature sensor. Next to the
symbol the name (see PID) and the
measured value are displayed.
2
Level switch. Next to the symbol the
name (see PID) is displayed. The small
dot on the top right of the symbol
indicates the status of the switch:
• White: No liquid is detected
• Blue: Liquid is detected
2
Push this symbol to open the
submenus of the degassing and
storage tank and of the degassing fans.
8.5.15
2
Push this symbol to open the
submenus of the cells lines and cells.
8.5.7
1
2
3
Area
2
Solenoid valve. Next to the symbol the
name (see PID) is displayed.
2
Flow sensor. Next to the symbol the
name (see PID) and the measured
value are displayed.
2
Push this symbol to open the
submenus of the brine dosing station.
8.5.14
3
Push this symbol to view the help text
for the active menu.
3
Push this symbol to log out the current
user.
Indicates that no user is logged in.
3
No messages or alarms are present.
Alarm is present. System switches to
"Stop" state.
Push this symbol to reset all active
alarms before the system can be
started again. After reset, the system
remains in "Stop" state until it is started
again.
8.5.4
These buttons require user log in with level: 1
Users
. 8.5.21
3
Push this button to switch the system to
operating state "Production".
8.3.2
Push this button to switch the system
from operating state "Standby" to
"Production".
Push this button to switch the system to
"Stop" state.
3
Indicates that the system is in control
mode "Local". Push this button to
activate control mode "Remote".
8.3.1
Indicates that the system is in control
mode "Remote". Push this button to
activate control mode "Local".
3
Push this button to deactivate the
touchscreen temporarily to clean it.
3
Push this button to open the menu
"
System menu
".
8.5.18
Symbol
Ar
ea Description
See
section