Grundfos Selcoperm SES Series, Инструкция по установке и эксплуатации

Страница: 56 / 82

English (GB)
56
8.5.22
Service menu
This menu and its submenus are for service persons only.
If this menu is opened, the system switches to operating state
"Stop", and the operation mode "Service" is activated, which is
indicated by the [
] symbol.
Fig. 58
Service menu
To revert to the previous menu, push [ ]. The system switches
back to operation mode "Automatic".
To restart the system, push [
].
For details on general menu symbols see section 8.5.6
System
overview
.
8.5.23
Service I/O Values
This menu shows information on all inputs and outputs of the
system.
Fig. 59
Service I/O Values
To revert to the previous menu, push [ ].
For details on general menu symbols see section 8.5.6
System
overview
.
Menu action Required user level
Access menu 3
Commissioning staff
Change settings 4
Administrators
ID 01
05
Symbol Description
See
section
Push this symbol to open menu "
Service
I/O Values
".
8.5.23
Push this symbol to open menu "
Service
Power Supply
".
8.5.24
Push this symbol to open menu "
Service
Cell Lines
".
8.5.25
Push this symbol to open menu "
Service
Tank
".
8.5.26
Push this symbol to open menu "
Service
Acid Cleaning
".
8.5.27
"
OP
":
• Push this symbol to switch the
touchscreen to show the operating
system of the touchscreen.
"
PLC
":
• Push this symbol to stop the PLC.
"
OP
":
• Push this symbol to switch the
touchscreen to online mode (connected
to PLC, data exchange active).
"
PLC
":
• Push this symbol to start the PLC.
Push this symbol to switch the
touchscreen to offline mode (not
connected to PLC, data exchange
inactive).
• Push this symbol to switch the
touchscreen to the operating system of
the touchscreen, and update the
software version.
Menu action Required user level
Access menu 3
Commissioning staff
ID
02
00