Grundfos BoosterpaQ Hydro MPC, Инструкция по установке и эксплуатации

Страница: 47 / 58

47
Description
CU 351 is equipped with an Ethernet connection for
communication with a computer, either directly or via Internet. For
further information, see
10.8.1 Ethernet .
10.7.46 GENIbus number (4.5.6)
Fig. 74
GENIbus number
Description
CU 351 can communicate with external units via an RS-485
interface (option). For further information see fig. 76 and
10.8.2 GENIbus .
Communication is carried out according to the Grundfos bus
protocol, GENIbus, and enables connection to a building
management system or another external control system.
Operating parameters, such as setpoint and operating mode, can
be set via the bus signal. Furthermore, status about important
parameters, such as current value and input power, and fault
indications can be read from the CU 351.
Contact Grundfos for further information.
Setting range
The number can be set between 1 and 64.
Setting via control panel
1. Mark the
Settings
menu with .
2. Mark
Functions, CU 351
with or and press .
3. Mark
GENIbus numbe
r with or and press .
4. Select the number with or and save with .
Factory setting
No number is set ("-").
10.7.47 Software status (4.5.9)
Fig. 75
Software status
Description
This display shows the status of the software installed in the
CU 351. Furthermore the version code and the product numbers
of configuration files (.gsc) read into the unit are shown.
As it is a status display, no settings can be made.
T
M
03
22
97
40
05
T
M
03
22
96
40
05
www.motralec.com / service-commercial@motralec.com / 01.39.97.65.10