Operation
48 | 76
BA_TD
3-
BS
00
0en
_07
4_sof
tli
Q
-S
C
.docx
» If the colour changes to green, the water hardness has been determined.
The number of drops corresponds to the degree of hardness in °dH or °f.
Example:
Test tube filled up to the °dH mark: 6 drops = 6 °dH.
Test tube filled up to the °f mark: 6 drops= 6 °f.
7.4.3
Determining the water hardness in mol/m³ (mmol/l)
1.
Determine the water hardness in °f as described.
2.
Divide the °f measured by 10.
The water hardness in °f divided by 10 corresponds to the degree of
hardness in mol/m³ (= mmol/l).
Example:
6 drops = 6 °f = 0.6 mol/m³ = 0.6 mmol/l.
7.4.4
Entering the water hardness
Status level>Menu level>Water hardness
1.
Press and hold the ▼ and ▲ buttons for 2 seconds.
2.
Enter the value of the raw water hardness with ▼ and ▲.
3.
Confirm with ENTER.
4.
Enter the index value of the soft water hardness with ▼ and ▲.
The maximum soft water hardness that may be set is approx. 50 % of the raw
water hardness present.
5.
Confirm with ENTER.
7.5
Selecting the time of regeneration
Status level>Menu level>Settings>Select time of regeneration
You have the following selection options:
● Automatic
● Fixed
Содержание softliQ:SC
Страница 1: ...We understand water Water softener softliQ SC Operation manual...
Страница 72: ...Notes 72 76 Notes...
Страница 75: ......