manualshive.com logo in svg

Grizzly G0715P, Руководство пользователя

Владельцы станка Grizzly G0715P могут легко найти и скачать Руководство пользователя бесплатно на manualshive.com. Этот мануал содержит всю необходимую информацию для правильной эксплуатации оборудования. Не теряйте время и загрузите руководство прямо сейчас, чтобы получить полное удовольствие от использования станка.

Поделиться
Скачать
background image

Model G0715P (Mfg. 4/11+)

-5-

The information contained herein is deemed accurate as of 1/28/2016 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 2 OF 3

Model G0715P

Main Specifications:

Main Information

Table Saw Type....................................................................................................................................... Hybrid

Maximum Blade Diameter......................................................................................................................... 10 in.

Arbor Size................................................................................................................................................. 5/8 in.

Arbor Speed...................................................................................................................................... 3850 RPM

Maximum Width of Dado...................................................................................................................... 13/16 in.

Blade Tilt Direction....................................................................................................................................... Left

Max Blade Tilt......................................................................................................................................... 45 deg.

Maximum Depth of Cut At 90 Degrees.................................................................................................. 3-1/8 in.

Maximum Depth of Cut At 45 Degrees................................................................................................ 2-3/16 in.

Max Rip Right of Blade w/Included Fence & Rails.................................................................................... 30 in.

Max Rip Left of Blade w/Included Fence & Rails....................................................................................... 12 in.

Additional Blade Information

Included Blade Information.................................................................................................................. 10" x 40T

Riving Knife/Spreader Thickness.............................................................................................................. 0.1 in.

Required Blade Body Thickness.............................................................................................. 0.071 – 0.094 in.

Required Blade Kerf Thickness............................................................................................... 0.102 – 0.126 in.

Rim Speed at Max Blade Diameter................................................................................................. 10,100 FPM

Table Information

Floor to Table Height................................................................................................................................. 34 in.

Table Size with Extension Wings Width.................................................................................................... 40 in.

Table Size with Extension Wings Depth.................................................................................................... 27 in.

Distance Front of Table to Center of Blade......................................................................................... 16-1/4 in.

Distance Front of Table to Blade At Maximum Cut............................................................................. 11-5/8 in.

Main Table Size Thickness.................................................................................................................... 1-1/2 in.

Fence Information

Fence Type.................................................................................................... Camlock T-Shape w/HDPE Face

Fence Size Length............................................................................................................................... 34-1/4 in.

Fence Size Width.................................................................................................................................. 3-1/8 in.

Fence Size Height................................................................................................................................. 2-1/2 in.

Fence Rail Type............................................................................................... Square Steel Tubing/Angle Iron

Fence Rail Length............................................................................................................................... 59-5/8 in.

Fence Rail Width......................................................................................................................................... 2 in.

Fence Rail Height.................................................................................................................................. 1-5/8 in.

Miter Gauge Information

Miter Gauge Slot Type.............................................................................................................................. T-Slot

Miter Gauge Slot Size Width..................................................................................................................... 3/4 in.

Miter Gauge Slot Size Height................................................................................................................... 3/8 in.

Construction

Table....................................................................................................................... Precision-Ground Cast Iron

Wings...................................................................................................................... Precision-Ground Cast Iron

Cabinet................................................................................................................................... Pre-Formed Steel

Trunnions............................................................................................................................................. Cast Iron

Fence Assembly................................................................................................... Steel with HDPE Side Plates

Rails........................................................................................................................................................... Steel

Miter Guage Construction................................................................................................................... Aluminum

Guard............................................................................................................................. Steel and Clear Plastic

Body/Cabinet Paint Type/Finish................................................................................................ Powder Coated

Arbor Bearings.............................................................................................. Sealed & Permanently Lubricated

Other Related Information

Number of Dust Ports....................................................................................................................................... 1

Dust Port Size.............................................................................................................................................. 4 in.

Compatible Mobile Base........................................................................................................................ D2057A

Содержание G0715P

























































































Отзывы:

Нет отзывов

Похожие инструкции для G0715P

Parkside PTK 2000 C3 Translation Of The Original Instructions preview
PTK 2000 C3
Бренд: Parkside Страницы: 108
Poulan Pro PP258TP Instruction Manual preview
PP258TP
Бренд: Poulan Pro Страницы: 60
Delta SIDEKICK 36-090 Instruction Manual preview
SIDEKICK 36-090
Бренд: Delta Страницы: 24
Delta ShopMaster TS200 Instruction Manual preview
ShopMaster TS200
Бренд: Delta Страницы: 52
Ozito MSW-3000 Instruction Manual preview
MSW-3000
Бренд: Ozito Страницы: 7
Femi job FLEXICUT 1140E Translation Of The Original Instructions preview
job FLEXICUT 1140E
Бренд: Femi Страницы: 116
RIDGID R3203-1 Operator'S Manual preview
R3203-1
Бренд: RIDGID Страницы: 48
Craftsman 316.79246 Operator'S Manual preview
316.79246
Бренд: Craftsman Страницы: 20
Ferm FBS-400 User Manual preview
FBS-400
Бренд: Ferm Страницы: 60
Hitachi Koki C 12LSH Handling Instructions Manual preview
C 12LSH
Бренд: Hitachi Koki Страницы: 76
Meec tools 380-035 Operating Instructions Manual preview
380-035
Бренд: Meec tools Страницы: 75
AGP RS130B Instruction Manual preview
RS130B
Бренд: AGP Страницы: 16
AGP 0.75KW115V Original Instructions Manual preview
0.75KW115V
Бренд: AGP Страницы: 16
GMC LS1375 Instruction Manual preview
LS1375
Бренд: GMC Страницы: 16
A-PLUS AUTOMATION T2 Series Instruction Handbook Manual preview
T2 Series
Бренд: A-PLUS AUTOMATION Страницы: 48
XM Controls Tandem-Wire Operation Manual preview
Tandem-Wire
Бренд: XM Controls Страницы: 41
King Canada KC-712DS Service Manual & Parts List preview
KC-712DS
Бренд: King Canada Страницы: 8
Sandri Garden SG 1225/25 CS Instruction Manual preview
SG 1225/25 CS
Бренд: Sandri Garden Страницы: 104

Бренды по названию

Популярные бренды

Загрузить еще бренды