Grid Tie PV-10000T-U, Руководство по установке и эксплуатации

Страница: 61 / 84

60
The 7-segment display screen exits stand-by mode and goes to countdown
mode when inverter receives sufficient DC power from solar panels again or
internal communication fault gets resolved.
10.2.2 Countdown Mode
When inverter is ready to connect to electrical grid, the 7-segment display
screen enters a 300-second countdown. This is to notify user that inverter will
be starting generating power soon.
10.2.3 Regular Mode
When inverter has connected to electrical grid and started generating power, of
the 7-segment display screen enters regular mode. This mode carries and shows
inverter numbers and messages with a 2-second interval between. The starting
on-screen information by default is always Total Pac, which is the cumulative
solar power that has been generated today (unit: W). Push the button on LED
panel once to make all inverter information rolled on 7-segment display screen
in a sequence. Refer to the flow chart below for the sequence and on-screen
inverter information. If there has been no error occurred, error message is not
included in the sequence and will not be shown on 7-segment display screen.
When the roll of sequence has completed, the on-screen figure will return to
cumulative solar power that has been generated today (unit: W), which is where
the flow began from.