Grid Tie PV-10000T-U, Руководство по установке и эксплуатации

Страница: 49 / 84

48
7.6.3 Firmware Upgrade
The inverter can be upgraded to the latest firmware version via USB or Internet.
To do this, you will need to have either the firmware update in a USB stick or
the inverter connected to the Internet. Please consult your local service
provider for more details; to do upgrade via Internet; please refer to “Settings”
on page 50 to enable AUTO FW Update functionality.
7.6.4 Setting PF and 70% Power Limi t
These parameters can only be done by an authorized agent. Please contact your
local service provider if assistance is needed.
7.6.5 Capacity of Memory
The internal memory of inverter can store up to 3-year length of data. Data
older than 3 year will be overwritten automatically.
7.7 Browsing Inverter Web Page
7.7.1 Basics
Inverter has a built-in and multi-functional web page that user can access via
LAN/WLAN. The recommended web browsers are Internet Explorer, Firefox
and Safari. Follow the steps below to explore the inverter web page.
1. Make sure you have successfully connected inverter to a LAN by either
Ethernet or Wi-Fi.
2. Tap touch pad to switch to “Operation Frame” to read off the inverter’s
IP address.
3. Open a web browser on your desktop/laptop, key in the IP address you
have read previously at the address bar (Refer to figure below. The
example IP address here is 192.168.10.122).
4. Daily graphs will load soon after.
Back Up Inverter Data Periodically
Once the data stored in logger has been deleted, it cannot be
retrieved. It is highly recommended to back up your inverter
data periodically if you wish to retain all recordings.