Page 22
OCF 6.1 Open Channel Flow Monitor
SPECIAL FUNCTIONS
Language
Select
English
,
Spanish
or
French
.
Analog Out
Select 4-20mA or 0-5V mode for the analog
output.
Backlight
Select
High
,
Medium
or
Low
for continuous
backlight.
Select
Key
Hi/Lo
for high backlight (for 1 minute)
after a keypress and then
Lo
backlight until a
key is pressed again.
Select
Key
High
,
Med
or
Low
for backlight
after a keypress and then backlight off until a key
is pressed again.
Reset Totalizer
Select
Yes
to erase and restart the totalizer at
zero. This only effects the main totalizer. The 365
day data remains unchanged.
Capture Par
This function captures the programming
parameters in the meter. Select
Yes
, wait for
Done
to appear, then insert a USB drive into the USB
port to transfer the parameters.
Restore Defaults
Select
US
to erase all user settings and return the instrument
to factory default settings with US units. Select
Metr
to return the instrument to factory default
settings with metric units
New Password
Select any number from 0000 to 9999 and press
. Default setting of 0000 will allow direct access
to the calibration menus. Setting of any password
greater than 0000 will require the password to be
entered to access the calibration menus.
Press
to return to
Menu Selections
.
- - Sp e c i a l F u n c t i o n s -
L a n g u a g e
En g l i s h
An a l o g Ou t
4 - 2 0 mA
Ba c k l i g h t
Hi g h
Re s e t T o t a l i z e r
NO
Ca p t u r e Pa r
NO
Re s t o r e De f a u l t s
NO
Ne w Pa s s wo r d
0 0 0 0
