Greyline AVFM 6.1, Руководство пользователя

Страница: 22 / 65

Page 22
AVFM 6.1 Area-Velocity Flow Meter
SPECIAL FUNCTIONS
Language
Select
English
,
Spanish
or
French
Analog Out
Select 4-20mA or 0-5V mode for the analog output.
Backlight
Select
High
,
Medium
or
Low
for continuous
backlight.
Select
Key Hi/Lo
for high backlight (for 1
minute) after a keypress and then
Lo
backlight until a
key is pressed again.
Select
Key High
,
Med
or
Low
for backlight
after a keypress and then backlight off until a key is
pressed again.
Reset Totalizer
Select
Yes
to erase and restart the totalizer at zero.
This only effects the main totalizer. The 365 day data
remains unchanged.
Neg. Totals
Select
Yes
to have reverse flow readings deducted
from the totalizer. Select
No
to totalize forward flow
only and ignore reverse flow.
Rev Flow
Select
On
to enable flow direction measurement.
Select
Off
to disable flow direction measurement so
that flow in either direction is displayed and output as
positive values.
Select
Invert
to invert the sense of the flow
measurement.
Capture WF
This function should only be used when instructed by a
Greyline representative to do so. The function captures
the ultrasonic signal so that it can be evaluated by
Greyline.
Capture Par
This function captures the programming parameters in
the meter. Select
Yes
, wait for
Done
to appear, then
insert a USB drive into the USB port to transfer the
parameters.
Restore Defaults
Select
US
to erase all user settings and return the
instrument to factory default settings with US units.
Select
Metr
to return the instrument to factory default
settings with metric units.
--Special Functions-
Language English 
Analog Out 4-20mA
Backlight High
Reset Totalizer NO
Neg. Totals NO
Rev. Flow Off
Capture Par No
Capture WF No
Restore Defaults NO
New Password 0000