Greenwood Frontier CX, Инструкция по установке и эксплуатации

Страница: 13 / 58

INTRODUCTION
© 2013 Greenwood Clean Energy, Inc All Rights Reserved V1.9 Page 9
Fluid Flow through the Furnace
The Frontier Series uses a mixture of water, boiler treatment and optional propylene glycol as a heat transfer
fluid. Propylene glycol is a non-toxic solution that prevents the fluid from freezing. The heat transfer fluid
flows through the system as follows:
1. The circulator pushes fluid around the boiler loop.
2. Fluid temperature is monitored by the Greenwood Boiler Management System. The intelligent
control adjusts the burn rate of the furnace, balancing a clean burn heat demand.
3. Fluid passing through the internal heat exchange manifold is heated by the exiting combustion
gasses.
4. The heated fluid enters the Frontier CX Hydronic Conditioning Manifold
TM
where flows and
temperatures are optimized. (See ‘Plumbing Installation’ section for complete description.)
5. The fluid enters your home heating system through the Supply Port , distributing heat to your home,
garage, basement, pool, and domestic hot water.
6. Having transferred the heat to the home system, the fluid returns through the Return Port and
repeats its path through the Hydronic Conditioning Manifold and internal heat exchanger.
Side View of Fluid Flow through the Frontier Series