LiAir
22
0N User Guide • GreenValley International Inc.
Page 5
1.
Read This First
Important Notices
STOP! PLEASE READ THIS SECTION CAREFULLY BEFORE USING THE
PRODUCT!
LiAir 220N systems use Class 1 (IEC60825-1:2014) eye-safe laser sensors. If you have any
concerns, please contact GVI for details.
System operator must be at least 18 years old.
Tampering with the product is strictly prohibited and will void the Product Warranty. Any
repair, modification, or upgrade must be performed by GVI technician or authorized service
provider.
Do NOT use any power supply outside the specified voltage range
(12~24 V, 1.1A@24VDC).
Incorrect voltage supply may cause permanent damages to the integrated instruments and
other hazards. Damage caused by the use of an unauthorized power supply are not covered
by the Product Warranty.
STOP using the product and contact GVI support immediately, if there is any visible damage
or if persistent system warnings or alarms are observed. Failure to do so may result in
permanent damage to the LiAir 220N system.
This product is NOT water-proof. Do NOT operate in rain or snow. Water damage is NOT
covered by the Product Warranty.
This product is a high-precision mapping and surveying instrument that must be handled
with care. Damage caused by improper handling of the product are not covered by the
Product Warranty.
Properly disconnect all batteries, antennas, and cables after use.
This product should by stored and transported in the protective case provided with the LiAir
220N at the time of purchase or in a productive case authorized for use by GVI.
Clean the product thoroughly after each use. Do NOT use water.
When not in use, store LiAir 220N system and accessories in a cool and dry environment.
