LiAir
22
0N User Guide • GreenValley International Inc.
Page 27
Figure 16. Pos Setting Interface
(1) Select LiNav processing mode
(2) Select the processing mode according to the length of the trajectory. It is recommended to use
the general mode. When the length of the trajectory is more than 10 km, the long baseline mode can
be selected.
(3) Load rover station data, under normal circumstances, the software will automatically read the rover
station data under the project folder
(4) Select base station data
Under normal circumstances, the software will automatically read the base station data in the project
folder, or manually load the base station data.
If the format of the local base station is the Rinex format, select the Rinex option to load the base
station data.
