LiAir
22
0N User Guide • GreenValley International Inc.
Page 31
Figure 23. “Camera Setting” Display Interface
5.2.3 Georeferencing Point Cloud Data
5.2.3.1 Select Georeference Range
Users could select the range to be georeferenced as needed. And there are two modes to be selected,
including "trajectory selection" or "draw polygon". And this document only introduces the operation
process of using the "trajectory selection" tool. The way of "drawing polygon" ould be found in the
user manual of LiGeoreference software.
(1)
Click the "Select On Trajectory" button on the main interface of the software, and a table will
automatically pop up at the same time, select the trajectory which needs to be georeferenced,
and click OK.
