green ecotherm GP 45 IV, Руководство пользователя, Страница: 50 / 53

Pellet burner GP 45 IV 50
Table 7.3. Description of faults/errors, shown on the control module display of a burner from
series “GP IV”.
No
Message shown on
the display
Meaning
Troubleshooting
1. IGNITION FAILED - Check for fuel and auger operation
or ask for servicing assistance;
2. LOST FIRE IN
COMBUSTION
Looses fire during
operation Check the auger connection, restart the
burner;
3. STOKER FAULT Auger connection is
interrupted Check the auger power supply, possible
reason could be overheating of the
pellets inlet pipe – check the thermo-
stickers;
4. TEMP- SENSOR LOW Temperature sensor
is switched off1
Check NTC sensor connection
5. PHOTOSENS Photo sensor fault Check the photo sensor condition,
replace it if necessary – to be performed
by servicing assistance;
6. TEMP SENSOR
OVERHEAT
High temperature
read by the
temperature sensor
Check the hot water boiler condition, cool
down the appliance;