Pellet burner GP 45 IV 24
6.2.1. INTERFACE CONTROL PANEL OF AUTOMATED WOOD PELLET BURNER
FROM SERIES “GP IV”.
Figure 6.1 represents interface control panel with display of an automated pellet burner from
series “GP IV”.
Figure 6.1. Interface control panel with display and keyboard for pellet burner from series
“GP IV”.
Interface control panel components and their functions:
Button „ S ” – is used for submenu choice and for confirmation of settings;
Button „ - ” – is used for decreasing the selected value from the controller menu;
Button „ + ” – is used for increasing the selected value from the controller menu;
Button „ Esc” – is used for canceling a parameter change from the controller menu
and to exit a chosen menu.
The above described buttons on the burner’s interface control panel can also
perform different function, which will be shown on the display.
6.2.2. CONNECTING AND POWERING THE BURNER.
All activities over the burner’s electrical installation or adjustments that require
removal of its covers or other components protecting its electrical parts from
touching by hand must be performed by eligible person.
The burner must be connected to the electrical installation of the appliance to which it is
mounted by observing the safety technique rules. The power supply cable and the attached
wiring diagram for connection to the power supply and the main control module of the burner
must be used.
The fuel transport auger is mounted in the fuel hopper and is positioned in a way providing
the necessary fuel feeding rate and is also filled with fuel.
Button „-” (its function
depends on the chosen
menu)
Button „+” (its function
depends on the chosen
menu)
Button “Exit”
Button “Enter”