Pellet burner GP 45 IV 29
Figure 6.4. The display shows information about the burner’s control module operation mode
– in this case the system checks the fresh (firing) air fan.
„TEST – BLOWING : – shows the operation mode – the fresh air fan performs
preliminary blowing of the burner’s fire-grate (shows the current phase of the
burner ignition).
„ 32
о
”
- shows (on the left bottom corner of the display, over the button ”S”) the
water temperature in the boiler (degrees Celsius). The temperature value is
indicated if a boiler water temperature sensor is installed and activated from the
controller menu;
„FC: 0% ” – shows the light intensity registered by the photo-sensor, in percent
– displayed in the right bottom corner, over the button “ESC”.
Figure 6.5. The display indicates information about the burner operation mode – in this case
it is ignition fuel doze firing.
S
_
+
ESC
TEST - BLOWING
32
o
FC: 0%
S
_
+
ESC
IGNITION 1 150
32
o
FC: 0%