Gree GKH(12)BA-K3DNA1A/I, Руководство по обслуживанию

Страница: 49 / 207

Super Free Match
Service Manual
CONTROL 45
3) Combination of " TEMP " and "CLOCK" buttons : About Energy-saving Function
Press “TEMP” and “CLOCK” simultaneously in COOL mode to start energy-saving function. Nixie tube on
the remote controller displays “SE”. Repeat the operation to quit the function.
4) Combination of "TEMP " and "CLOCK" buttons: About 8 ℃ Heating Function
Press “TEMP” and “CLOCK” simultaneously in HEAT mode to start 8 ℃ Heating Function Nixie tube on
the remote controller displays “ ” and a selected temperature of “8
℃
”. (46
℉
if Fahrenheit is adopted). Repeat
the operation to quit the function.
5) About Back-lighting Function
The unit lights for 4s when energizing for the first time, and 3s for later press.
3.4 Wireless Remote Controller YAG1FB
Notes:
a. Be sure that there are no obstructions between the receiver and the remote controller;
b. Do not drop or throw the remote controller;
c. Do not let any liquid into the remote controller and expose the remote controller to direct sunlight or any
place where is very hot.
d. This is only use for Hansol indoor unit. If press some button which is not available for the corresponding
function, the unit will keep the original running status.
3.4.1 Function of Press Buttons
1) ON/OFF
Press this button to turn on the unit. Press this button again to turn off the unit. Sleep function will be
canceled, while unit off.
2) MODE
Press this button, Auto, Cool, Dry, Fan, Heat mode can be selected circularly. Auto mode is default while
powered on. Under Auto mode the temperature will not be displayed; Under Heat mode, the initial value is 28 ℃
(82 ℉ ); Under other modes, the initial value is 25 ℃ (77 ℉ ).