PL5700 Planter
Pre-Delivery Instructions
Great Plains | 411-681M | 04/08/2021
116
Pre-Delivery Instructions
Crush and Pinch Hazards
A falling section or part can cause severe
injury or death by crushing. Always keep body
and body parts out from under any parts or
components of the planter. Ensure all
equipment is properly rated for the load before
attempting to unload the planter, move parts, or
assembly the planter. Ensure all equipment
operates with smooth movements before
beginning work.
Secure Machine
It is necessary for the shipping chain or strap
securing the wings to the tongue to remain in
place until the planter has been unloaded from
the trailer. Do not attempt to unfold the planter
when the shipping chain is installed. The
shipping chain or strap should not secure any
part of the planter to the trailer. Failure to keep
shipping chain or strap secured during
unloading can result in the planter becoming
unbalanced. A falling planter can cause severe
injury or death.
Flailing Hazard
Marker hydraulics are active whenever the fold
hydraulics are not in use. It is important to set
the tractor fold/marker hydraulic circuit lever to
“Float” or “Neutral” to prevent unintended
marker operations. Unexpected marker operation
and flailing equipment can serious injures
including death.
Frame Damage Risk
Do not raise/lower the wing gauge wheels at
any time with shipping chain or strap installed
on tongue. While the shipping chain is installed
the planter lift hydraulic system should only be
operated as “Center” or “Center Lift” or planter
frame damage can occur.
This section covers instructions exclusively for the
dealer to assembly and produce a properly working
machine for the customer. All workers must read
and understand this entire manual before beginning
assembly and setup.
The instructions in this section are not intended for
customer use.
Illustrations in this section were not completed
during an actual assembly. For clarity, some
illustrations may or may not include parts,
assemblies, and other components at the same
point in an actual assembly.
Ensure you have all the necessary tools and
equipment before beginning assembly. Ensure
heavy machinery and tools are properly rated for
tasks.
As the assembly steps are completed, ensure
removed items or items set aside are a safe
distance away from work area and will continue to
allow for adequate space to safely complete
assembly.
It is the dealer’s responsibility to unload the PL5700
planter. Unload all equipment before beginning
assembly. Do not attempt any work with the
PL5700 while on the truck.
It is the dealer’s responsibility to ensure any workers or
others in close proximity of the planter are familiar and
understand the contents of this manual, and are properly
trained to work, assemble, operate, and perform
maintenance on the planter and the other machinery
used to assemble the PL5700 planter.
Requirement Checklist
Read and understand “
page 2 before beginning to assemble the planter.
Have at least two people on hand during assembly.
Appoint a designated observer and have a plan to
safely complete assembly.
Ensure the assembly location is level and free of
obstructions and debris. Great Plains recommends an
open, concrete area.
Have all major components and required tools. Test to
ensure they are properly working before beginning
work.
Account for all loose components, fasteners, and pins
shipped with the PL5700 planter.
Use a tractor of sufficient size and horsepower with at
least
three
hydraulic
circuits.
Refer
to
” on page 90 for tractor requirements.
Ensure safety decals and reflectors are located
correctly and legible. Replace if improperly located or
damaged. Refer to “
Have a copy of the parts manual on hand for
reference. If unsure of proper placement or use of any
part or fastener, refer to the parts manual.
Tools Required
PL5700 Planter parts manual (411-681P).
General hand tools.
Suitable tractor. See “
!
!
!
!
Содержание PL5700
