GREAT PLAINS PL5700, Руководство оператора

Страница: 35 / 150

PL5700 Planter Table of Contents Index Operation
Great Plains | 411-681M | 04/08/2021 28
Operational Sequence - Dual Markers
All Planters with Markers
Dual markers are equipped with a sequence valve to
control lift sequence. Starting with both markers up,
the operational sequence is:
1. Extend tractor hydraulic lever; right maker lowers
while left marker stays up.
2. Retract tractor hydraulic lever, right marker raises
while left marker stays up.
3. Extend tractor hydraulic lever, left marker lowers
while right marker stays up.
4. Retract tractor hydraulic lever; left marker raises
while right marker stays up.
5. Pattern repeats.
To move both markers in the lowered
position at the same time, activate hydraulic
lever to lower one marker. After marker is
lowered, move lever to opposite position
then quickly reverse lever and hold until the
other marker is lowered.

Ground Drive Section Control (Option)
Section Control will allow for independent control of
rows and sections depending on your overall planter
configuration.
With Switch Box
With ground drive planters configured with section
control, the individual left and right electric clutches
will allow for the independent control of the
left-and-right row sections during field operations.
The left clutch will control the left wing row section
and the right clutch will control the right wing row
section. On planters configured with 16 row
configurations, rows 1-8 will be the left-section and
rows 9-16 will be the right-section. On planters with
12 row configurations, rows 1-6 will be the
left-section and rows 7-12 will be the right-section.
During planting operations, each clutch switch
indicates:

a lit
GREEN
light for active row section, and

a lit
RED
light for inactive row section.
To select the left row section for active operation:
toggle the left clutch switch downwards; a lit
GREEN
light on the left clutch switch will indicate
the necessary selection has been made.
To select the right row section for active operation:
toggle the right clutch switch downwards; a lit
GREEN light on the right clutch switch will
indicate the necessary selection has been made.

Swath Command™ (Option)
The optional Swath Command™ system replaces
the standard 2-section operator-controlled clutches
with clutches under console control. There are 8
sections of clutches for 16-row planters, and 6
sections of clutches for 12-row planters.
The Swath Command system automatically turns off
rows when the row unit enters a non-planting area,
as defined by pre-loaded information, or if the row
enters an area already logged as planted during
previous passes.
Refer to the Swath Command manual for setup and
operation of the system.
i
TP-71665
TP-71665
TP-71665