NOTICE TECHNIQUE LS100
LS100 TECHNICAL MANUAL
Date : June 2009 From
Aftersales Technical Support
Ref. LS100 GB/FF - Vers. 1.0
Page 51
Remove the adjusting screw of the belt tensioning idler.
Dégager la courroie de la poulie.
Remove the belt tensioning idler by the screw located under the pulley
and the tension nut.
Déposer le tendeur en dévissant sous trouvant sous la poulie et retirer
l’écrou de tension.
Reassembling operation -
Opération de remontage
Put back the tension nut.
Replacer l’écrou de tension.
Put back the belt tensioning idler by the screw located under the pulley.
Remettre le tendeur par la vis sous trouvant sous la poulie.
Put back the tension screw without tightened it.
Replacer la vis de réglage tension dans l’écrou mais ne pas serrer.
Put back the locking screw without tightened it.
Replacer la vis de blocage sans la serrer.
Put back the belt.
Remettre en place la courroie.
