GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
12/2011
Made in
Vietnam
16
When connecting the speed controller it is important to check that polarity is correct,
i.e. that the motor rotates in the appropriate direction. Refer to the instructions sup-
plied with the speed controller and the motor for more information.
Installing the switch in the fuselage
The ON / OFF switch for the RC system (PRX 3A) can be installed in either fuselage
side (right or left). Use the tip of a hot soldering iron to melt the film over the openings
for the switch slider and the LED. The switch can then be installed in the fuselage
side using the retaining screws supplied with the unit.
The canopy
Glue the dummy pilot and the seat backrest to the cabin frame as shown in the photo
(Stabilit Express).
When the glue has set hard, attach the canopy to the frame using the six pan-head
self-tapping screws supplied in the accessory pack.
