GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
12/2011
Made in
Vietnam
4
For connecting the aileron servos to the receiver you will need two extension leads
180 mm and 320 mm long; foam rubber is also required for packing the receiver and
battery, e.g. foam rubber, Order No. 1637.
Adhesives
White glue, e.g. UHU coll, Order No. 958.60
UHU hart, e.g. Order No. 534.35
Cyano-acrylate (“cyano”), e.g. Order No. 5822
Thread-lock fluid, e.g. Order No. 952
Accessories required for the glow-engined version (not included)
Fuel based on synthetic oil, to suit engine
Fuel filter, e.g. Order No. 1650.1
Fuel tubing, e.g. Order No. 1643
Manual fuel pump, e.g. Order No. 1610
Glowplug energizer battery with plug clip, e.g. Order No. 3248
Electric starter, e.g. Order No. 1628
Starter battery, e.g. Order No. 2592
Accessories required for the electric-powered version (see table)
Battery chargers: see main FS catalogue
Tools required (not included)
Set of cross-point screwdrivers, flat-nose pliers, side-cutters, balsa knife or razor
blade, set of twist drills, universal glowplug spanner, soldering iron, set of allen keys.
Please don’t start assembling the model until you have checked the kit components
and the building instructions, and are familiar with the construction procedure. If you
are not happy with any component, kindly return it to your model shop without delay,
before you have modified it in any way.
Assembling the LANCAIR
The wing panels
Remove one arm from the servo output levers, as shown in the photo. Set the servos
to centre from the transmitter, and fit the output levers on the servo output shafts.
