GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
12/2011
Made in
Vietnam
8
The wheels and the wheel axles can now be attached, as described below:
The first step is to fit the wheel and collets on the axle; the collets are used to centre
the wheels in the wheel spats. Apply a drop of UHU thread-lock fluid to the grub-
screws and nuts to prevent them working loose.
Use the tip of a hot soldering iron to melt the film over the screw-holes and under-
carriage mountings. Fix the undercarriage units to the fuselage using the socket-head
cap screws supplied in the accessory pack.
Prepare the noseleg yoke as shown in the photo: dismantle the yoke, then re-
assemble it with the wheel spat in the proper location.
The yoke must be aligned with the wheel spat before the socket-head cap screw is
finally tightened: this can be checked with a setsquare.
