6
Important Note
No adhesives which contain solvents, in particular no superglue, must be used
for any glueing which comes into contact with the polystyrene in the wings
cores. These adhesives lead to the large-scale destruction of the styrofoam; the
part consequently becomes unusable. Always use solvent-free adhesives for
this process. We recommend glueing with UHU-Endfest or epoxy resin
thickened with cotton flocks. However, do avoid using 5 min Epoxy for
bondings which are relevant for statics or control technology!
Tip: Using with Epoxy Resins
Epoxy alone is not a viable adhesive! However, the addition of appropriate
additives turns laminating resin into a variety of excellent adhesives. Choose
the appropriate additive to create an adhesive which perfectly matches the job
requirements:
1. Chopped cotton fibre flocks produce a tough, but flexible bond.
2. Superfine glass fibres produce a very hard, but well grindable bond.
3. Micro-balloons produce a highly effective, lightweight filler.
Radio Control System
Especially recommended: Computer system from mc-12 to mc-24
or
